Grout Rescue Colour & Seal - Easy Applicator Kit with 237ml sealer

A great way to restore and renew your wall and floor grout to a better-than-new condition

Restoring and recolouring your tile grout is now even easier with the Grout Rescue Applicator Kit

Grout Rescue Colour & Seal grout dye is available in 10 stylish colours. When fully cured, it permanently seals tile grout to help protect against mould, mildew and staining for up to 15 years.

This applicator kit gives you the tools to make the process quick and easy. Choose between the brush head or the applicator wheels that fit onto the bottles for very fast and precise sealing - less mess, less waste and saving time and money!

Key features:

• Makes grout joints the colour you desire without removing the existing grout
• Professional performance - Up to 15 year protection 
• Completely water & stain proof
• Will not wear, discolour, or peel when installed correctly
• Quick drying with the ability to walk on the floor within 2 hours 
• Fast & accurate application- less waste, less mess
• Recolour and seal at once - save time and money
• 3mm wheel for wall & mosaic tiles. PLUS 5.5mm wheel for wide joints
• Brush head for walls & small floors
• Available in White, Light Grey, Mid Grey, Dark Grey, Black, Chocolate, Cappuccino, Sandstone, Limestone and Ivory
• Pre-treatment recommended for best results
• For internal use only - for outdoors, use Grout Rescue X
  
• Use in bathrooms, kitchens, shower rooms, wet rooms, utility rooms, and anywhere with tiles!

Directions of use

Due to our professional formula’s high polymer strength, you must complete a test patch to determine how long the product can be left on the surrounding tiles. Depending on the type of tile, you may need to remove the product excess within 5-10 minutes or it may be possible to leave up to 30 minutes – caution, if left too long it will be very difficult to remove.

For best results, we recommend a two-stage process:

Stage 1: Prime the grout surface area on both old and new installations with Grout Rescue Pre‑Treatment.
Stage 2: Apply Grout Rescue Colour & Seal when the grout joints are clean and thoroughly dry.

1. Shake the bottle well before use. If using more than 1 bottle of a single colour for an application, mix all materials to ensure colour match and consistency. Make sure the grout joint is clean and thoroughly dry before applying Grout Rescue.
2. Use the brush head for walls and vertical grout, and the wheels for flooring grout lines. Gently squeeze the bottle to apply steadily and consistently onto the grout joint using your preferred application tool. Wipe away any excess sealer from the tile surface within the timeframe established from a project test (as a guide, within 30 minutes or less). Work in small manageable areas whilst applying and cleaning down - your test patch will dictate when to halt application to remove excess.
3. Allow 48 hours drying time before wetting (using shower room) or cleaning the treated grout area. 
   

Poor application, applying the grout colourant too heavily or thickly onto the grout joint can result in blistering, cracking and de-bonding of the colour sealer. This product is not recommended for use around porous surfaces i.e. unglazed tiles and natural stone surfaces as it could permanently stain. FOR INTERNAL USE ONLY.