Grout Rescue X - 450ml Outdoor Grout & Pointing Colour Sealer

Outdoor grout colourant and sealer

A simple and affordable way to restore and renew your patio grout or pointing to a better-than-new condition

Grout Rescue X Colour Sealer grout and pointing dye is available in 5 practical colours, when fully cured, permanently seals patio grout to help protect against mould, mildew and staining for up to 15 years.

Universeal Patio Grout Rescue X helps to keep external patio grout joints clean, watertight and in pristine condition. Simple to apply, our polymer-based formulation bonds securely onto the grout joint, protecting, sealing and consistently colourising for a long-term barrier. Suitable for use on grout & pointing applied to: Porcelain & ceramic tiles plus non-acid sensitive stone: sandstone, quarry tiles, terracotta, slate, granite, etc.

Key features:

• Available in Mid Grey, Dark Grey, Black, Sandstone and Limestone
  
• 100% frost, stain and water proof
• Perfect for revamping porcelain paving grout
• One coat application to recolour, renew and protect external pointing and cement grout
  
• Eliminate frost damage, cracking and weed & grass growth between tiles
• For external use
• Up to 15 years protection
• Practical colour options to suit any modern paving or tile

Directions of use

For best results, we recommend a two stage process:

Stage 1: Prime the grout or pointing area on both old and new installations with Grout Rescue X Pre‑Treat Cleaner.
Stage 2: Apply Grout Rescue X Colour Sealer when the pointing / grout joints are clean and thoroughly dry.

1. Stage 1: Using Grout Rescue X Pre-treat Cleaner is very important to achieve perfect results prior to application of Grout Rescue X Colour Sealer. Prime (etch) the grout surface area by thoroughly cleaning grime, debris and algae/lichen with the Pre-treat cleaner as per its instructions.
2. Stage 2: Make sure grout joints are clean and thoroughly dry before applying Grout Rescue X outdoor grout sealer. Shake bottle & mix well before use, always complete a small test patch to understand the best process of application.
3. Apply product thinly onto the grout joint using a small paint or toothbrush, working it evenly onto the grout surface. Wipe away any sealer with a damp cloth or sponge from the tile edge instantly or within a maximum of 10 minutes of application, being careful not to disturb the treated grout joint. Dries within 1-2 hours, and achieves full cure within 48-72 hours. Avoid unnecessary use or footfall during this time. If using more than 1 bottle of a single colour for an application, mix all materials to ensure colour match and consistency.

Poor application, applying the product too heavily or thickly onto the grout joint can result in blistering, cracking and de-bonding.
Always perform a small inconspicuous test on-site to determine suitable application process for your project. FOR EXTERNAL USE ONLY.